An excellent electrical material is an advantage in the setting in conformity. This is why our team of electrical engineers does not hesitate to use what there is best.
Here a small outline of the electrical material which we use:
The LG7 Box
Assembly of emergency stop + minimum of tension, including :
- 1 projecting case LG07D12-16
- 1 button punch
- 1 minimum GV2 AX 225 or 385
- 1 driving starter ON/OFF
- 1 driving circuit breaker
- 1 button on
- 1 button stop
- 1 coil
The GV2 box
Assembly of emergency stop + minimum of tension, including :
- 1 projecting Case GV2 IP.55
- 1 button punch
- 1 minimum GV2 AX 225 or 385
- 1 driving circuit breaker
The neutral of the turning machine
Normally open contact preventing the starting of the turn if the manual order lever is not in position zero.
The magnetic microphone-switch
Prevents the opening of the cap or door. It is used when an high degree of safety is required
The relay of safety
It follows the magnetic microphone-switch automatically. 2 contacts into series. It Cuts the control circuit
The standard microphone-switch or on hinge for cap and carries
Prevent the opening of the cap or door when a normal degree of safety is required.
The pedal switch
It makes it possible to control the machine with the foot for starting. It is obligatory to leave the foot for the operation of the machine.
The case stop or of emergency stop
Case including a boltable switch. It is necessary to turn the button to unbolt it.
The bi manual control
Control which requires, as its name indicates it, the 2 hands for the operation of the machine.
The system of exemption and its luminous beacon
It makes it possible to be able to remove protections of the machine temporarily. The beacon begins then to winkle.
The photoelectric detector (cell)
Immaterial barrier setting off the stopping of the machine when the operator passes the beam. It is necessary to rearm the machine by a push-button.
The switch with cable
Protection of the worker around the machine. By tension or traction of the cable, the machine stops.
The telescopic switch – Antenna CP15
The telescopic switch with release is actuated by the deflection of a reinforced vertical antenna. You can lengthen or shorten the antenna of 6 stages in order to offer best protection in case d' urgency, and it will not disturb the good performance of the operation. The telescopic switch is designed first of all for a use with brake per injection of D.C. current which allows an instantaneous stopping of the machine.
- operation in positive mode
- robust telescopic aerial
- can function in all the directions
- replaceable actuators
- the movement on 10° allows a forced disconnection of the contacts of safety, positive operation